RSS Feed

Embedded Systems Blog

CANopen FD Conformance Test Passed

March 25th, 2022 No comments

The off-the-shelf I/O module PCAN-MicroMod FD DR CANopen from PEAK-System takes advantage of protocol stack from Embedded System Academy

The I/O device for DIN rail PCAN-MicroMod FD DR CANopen Digital 1 passed both the official CiA (CAN in Automation) conformance tests for CANopen® and for CANopen FD®. The device firmware is based on the Micro CANopen Plus protocol stack by Embedded Systems Academy (EmSA), gaining easyness stepping through the conformance tests.

The device is one of the first industrial off-the-shelf I/O devices available that offer both conformance-tested CANopen® and CANopen FD® interfaces. The configuration is simplified, 4 dials are used to make the settings, which are documented directly on the housing. No further configuration software is required.

PCAN-Router-FD

All other products from the PCAN-MicroMod FD line can load the Micro CANopen Plus protocol stack as an option. There are further aluminum-housed I/O modules supporting analog inputs and outputs, as well as PWM or frequency outputs, and a System on Module solution (SoM) to integrate customized I/O with CAN/CAN FD, CANopen, and CANopen FD operating modes.

CANopen EDS/XDD files are available for download for all PCAN-MicroMod FD products documenting the CANopen or CANopen FD functionality. Furthermore, the PCAN-MicroMod FD Evaluation Board includes a free CANopen FD license.

See the PCAN-MicroMod FD devices capable of CANopen and CANopen FD in our canopenstore.eu

You can leave a response, or trackback from your own site.

Leave a Reply

Your email address will not be published. Required fields are marked *